New study: Melanin conducts enough electricity to enable implantable electronics
What gives us color now may give rise to our cyborg future.
- Eumelanin is a mildly conductive type of melanin that produces dark pigmentation in hair, eyes, and skin.
- Researchers have just found a way to boost its conductivity without adding foreign materials.
- Eulemanin may be useable as a coating for implanted devices the body won't reject.
We are electrical creatures. Defibrillators jump-start us, for one thing, and electricity plays a part in how we work, down to a cellular level. Eumelanin, a dark pigment from which we get our eye, hair, and skin color, has been understood for nearly 50 years to conduct electricity. For almost as long, scientists have been looking for ways to take advantage of this trait, but eumelanin's conductivity has been too weak to serve any practical purpose beyond its biological role.
Now, however, a multi-discipline team of scientists from Italy — their findings were published in Frontiers in Chemistry on March 26 — have figured out how to boost that conductivity to the point that it may become usable as a coating for medical implants and other devices that human bodies won't reject.
"This is the first [stepping] stone of a long process that now can start," said chemist and lead author Alessandro Pezzella.
What’s been holding eumelanin’s conductivity back
Image source: Roland Mattern / Wikimedia Commons
Other teams have attempted to boost the conductivity of eumelanin by combining it with metals or super-heating it with graphene have helped increase it, but required adding metals and other chemicals the human body would reject.
Pezzella's team wondered if the problem was that the natural molecular structure of eumelanin was too chaotic, and too loosely packed to maintain a strong current. Says Pezzella, "All of the chemical and physical analyses of eumelanin paint the same picture — of electron-sharing molecular sheets, stacked messily together. The answer seemed obvious: Neaten the stacks and align the sheets, so they can all share electrons — then the electricity will flow."
Turning up the heat on eumelanin
They decided to try and achieve this, says co-author and electrical engineer Paolo Tassini, through "basically, heating in a vacuum" to tighten up eumelanin by getting rid of its water and vapor molecules. While water is often an aid to conductivity, in the case or eumelanin, it was suspected it might be holding it back. The process they employed isn't new — it's called "annealing" — and has been used before to boost conductivity in other materials.
Clumps of eumelanin were sealed in a high vacuum and heated to 600° C. Says Tassini, "We heated these eumelanin films — no thicker than a bacterium — under vacuum conditions, from 30 min up to 6 hours. We call the resulting material 'High Vacuum Annealed Eumelanin,' [or] 'HVAE.'"
"The HVAE films were now dark brown and about as thick as a virus," he says.
Pezzella tells phys.org, "The conductivity of the films increased billion-fold to an unprecedented value of over 300 S/cm, after annealing at 600°C for 2 hours." This is still far less than conductivity in metals, but it's now within a useful range.
What’s next for eumelanin
The process Pezzella's team came up with is simple enough that it will be easy to boost eumelanin's conductivity going forward, but that's just a beginning. He hopes to architect a simple-to-handle version of HVAE, perhaps a sheet of it, that will allow others to begin experimenting with using it as a coating for implantable technology. "Further research is needed to fully understand the ionic vs. electronic contributions in eumelanin conductivity," says Pezzella, "which could be key to how eumelanin is used practically in implantable electronics."
- Will cyborgs be made from melanin? Pigment breakthrough enables ... ›
- Your skin's melanin can conduct electricity, and scientists want to ... ›
- The pigment in our skin could be used to make electrical body ... ›
What can 3D printing do for medicine? The "sky is the limit," says Northwell Health researcher Dr. Todd Goldstein.
- Medical professionals are currently using 3D printers to create prosthetics and patient-specific organ models that doctors can use to prepare for surgery.
- Eventually, scientists hope to print patient-specific organs that can be transplanted safely into the human body.
- Northwell Health, New York State's largest health care provider, is pioneering 3D printing in medicine in three key ways.
Researchers advance machine learning to create videos of people from single stills and paintings.
- Samsung researchers improve AI modeling to quickly create realistic (but fake) videos.
- The model uses "single-shot learning" to create videos from a single picture.
- The application of the tech could be in telepresence, video conferencing and gaming.
As Game of Thrones ends, a revealing resolution to its perplexing geography.
- The fantasy world of Game of Thrones was inspired by real places and events.
- But the map of Westeros is a good example of the perplexing relation between fantasy and reality.
- Like Britain, it has a Wall in the North, but the map only really clicks into place if you add Ireland.
Neuroscience is working to conquer some of the human body's cruelest conditions: Paralysis, brain disease, and schizophrenia.
- Neuroscience and engineering are uniting in mind-blowing ways that will drastically improve the quality of life for people with conditions like epilepsy, paralysis or schizophrenia.
- Researchers have developed a brain-computer interface the size of a baby aspirin that can restore mobility to people with paralysis or amputated limbs. It rewires neural messages from the brain's motor cortex to a robotic arm, or reroutes it to the person's own muscles.
- Deep brain stimulation is another wonder of neuroscience that can effectively manage brain conditions like epilepsy, Parkinson's, and may one day mitigate schizophrenia so people can live normal, independent lives.
SMARTER FASTER trademarks owned by The Big Think, Inc. All rights reserved.